Preparation, characterization of chitosan/bamboo charcoal/poly(methacrylate) composite beads

Preparation and characterization of a low-cost, novel steam-activated bamboo charcoal (BC) and poly(methacrylate) (PMAA) bound with chitosan (CTS) to form chitosan/bamboo charcoal/poly(methacrylate) (CTS/BC/PMAA) composite beads is reported for the first time in this paper. The characteristics are revealed by techniques such as X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC), scanning electron microscopy (SEM), Brunauer Emmett Teller (BET), solution pH and pH at point of zero charge ( pH pzc ) . The composite beads possessed a dominant acidic surface group of 0.663 mmol g - 1 , as revealed by Boehm titration method. This acidity was confirmed by its solution pH of 6.46; pH pzc of 6.70 and increase in oxygen surface via XPS analysis. N 2 adsorption–desorption isotherms at 77 K of the beads revealed high BET surface area (SA) of 681.15 m 2 g - 1 . Langmuir model affords a SA of 773.34 m 2 g - 1 . SEM showed the microporous nature of the composite beads. The properties of CTS/BC/PMAA composite beads were compared to CTS/BC and neat BC. Thermal stability and successful coating of 5.1 wt% of PMAA and 6.8 wt% of CTS to CTS/BC/PMAA beads were shown by DSC and TGA analyses. The composite beads showed low carbon particle released at pH 7.4 and 6.8. Furthermore, dynamic adsorption revealed that CTS/BC/PMAA composite beads can be used to capture a polar substance, such as creatinine.