The ETACS European Project for testing the comparability of sensors and analysers: Part II. Field tests

The results of field tests performed within the European Testing and Assessment of Comparability of On-line Sensors/Analysers (ETACS) European Project are presented in this article. This work is complementary to the laboratory tests, already published in Part I in this Journal. The objective was to consider the complete measuring chain, including the sensor/analyser, sampling elements, pumping and conditioning devices needed for a particular application. These aspects were not included in the laboratory tests and, therefore, new facets were involved. Field tests are considered site specific in terms of the sample dynamic range and matrix composition, as well as event dependent with respect to environmental conditions. A protocol for checking the performance of sensors/analysers working in a field location is presented. The protocol is a general guide and, therefore, can be used independently of the nature of the sensor/analyser under evaluation.