Effect of temperature on flexible printed circuit board layout during reflow soldering process

High demands on flexibility, lighter weight, thinner size and low-cost electronic product had increased the application of Flexible Printed Circuit Board (FPCB) over Rigid Printed Circuit Board (RPCB). However, the thermal factor affects FPCB significantly during the reflow soldering process. The temperature of the reflow soldering process causes the FPCB to encounter significant deflection and thermal stress compared to the RPCB. Therefore, the present experiment investigates the effect of temperature on FPCB layout during the reflow soldering process. The deformation of RPCB and FPCB was measured using a KEYENCE LK-G152 laser sensor placed at the entrance and outlet of the reflow oven. Two temperature profiles were used as a variable for the experiment: soaking temperature profile and ramp temperature profile. The investigation shows that component placements pattern influences the deformation of FPCB. The FPCB component placements reduce the deformation due to low wetting angle and component weight. FPCB solder joint has a good wetting angle (