A gas detector planning method that considers the area and zone based on the range of influence of chemicals with high vapor pressure

In some countries with high population densities including Korea, chemical plants are densely distributed, and strict regulations are imposed. According to the Chemical Control Act, one gas detector must be installed every 10 m indoors and 20 m outdoors around a facility. However, the diffusion of chemicals should be evaluated based on area rather than perimeter. In the US and EU, gas detector locations are selected through chemical accident modeling. Here, we evaluated the feasibility of gas detector installation standards in the Chemicals Control Act by comparing highly volatile and toxic chemicals with sulfuric acid (relatively low volatility). Consequently, we suggested an appropriate installation location and number of gas detectors for initial countermeasures. For nitric acid, hydrochloric acid, and hydrofluoric acid, there was a difference in the number of detectors recommended via modeling and the number of detectors legally required. For the mezzanine design, four gas detectors should be installed on each floor in a 5‐story building; however, the modeling results showed that installing one was sufficient. For sulfuric acid with low vapor pressure, it is equitable to install a leak detector rather than a gas detector. Overall, regulations should be continuously evaluated for the response and prevention of chemical accidents.