Molecule‐Assisted Chemical Bath Deposition of Tin Oxide Electron Transport Layers in Perovskite Solar Cells

Chemical bath deposition (CBD) is a widely used approach to deposit the tin oxide (SnO2) electron transport layer (ETL) in the perovskite solar cell (PSC). However, the defect states in the CBD‐resulted SnO2 ETLs limit the electron extraction/transport from the perovskite to the ETL and lead to poor PSC performance. Herein, ethylenediaminetetraacetic acid dipotassium (EDTA‐2K) is used as an additive in the CBD precursor of the SnO2 ETL, which results in the chelation of Sn2+ and EDTA during the hydrolysis process. This strategy decreases the concentration of free Sn2+ in the precursor for hydrolysis and slows down the CBD process, thus attributes to the decreased surface defect states as well as the enhanced conductivity of the ETL. As a result, the EDTA‐2K additive makes the CBD SnO2 ETL with efficient electron extraction and transporting capability. The champion device achieves a power conversion efficiency (PCE) of 21.87%, which is significantly higher than that of the pristine CBD SnO2‐based device (20.25%). In addition, the device with an active area of 1.21 cm2 achieves a high PCE of 19.23%. This strategy makes the CBD SnO2 an excellent ETL candidate for the development of low‐cost and large‐scale PSCs. Molecule‐assisted chemical bath deposition achieves even and compact SnO2 films. The molecules slow down the hydrolysis of Sn precursor and suppress the generation of defects in the SnO2 film. The SnO2 film, as an electron transporting layer in perovskite solar cells, shows decent electron extraction capability and achieves large devices with high performance.