CNC Turning of an Additively Manufactured Complex Profile Ti6Al4V Component Considering the Effect of Layer Orientations

Electron beam melting (EBM) is one example of a 3D printing technology that has shown great promise and advantages in the fabrication of medical devices such as dental and orthopedic implants. However, these products require high surface quality control to meet the specifications; thus, post-processing, such as with machining processes, is required to improve surface quality. This paper investigates the influence of two-part orientations of Ti6Al4V EBM parts on the CNC machining (turning) process. The two possible EBM part orientations used in this work are across EBM layers (AL) and parallel to the EBM layer (PL). The effect of the EBM Ti6Al4V part orientations is examined on surface roughness, power consumption, chip morphology, tool flank wear, and surface morphology during the dry turning, while using uncoated carbide tools at different feed rates and cutting speeds. The results showed that the AL orientation had better surface quality control and integrity after machining than PL orientation. Using the same turning parameters, the difference between the roughness (Ra) value for AL (0.36 μm) and PL (0.79 μm) orientations is about 54%. Similarly, the power consumption in AL orientation differs by 19% from the power consumption in PL orientation. The chip thickness ratio has a difference of 23% between AL and PL orientations, and the flank wear shows a 40% difference between AL and PL orientations. It is found that, when EBM components are manufactured along across-layer (AL) orientations, the impact of part orientation during turning is minimized and machined surface integrity is improved.