Experimental and Numerical Study on Regulation of Cutting Temperature during the Circular Sawing of 45 Steel

Studying the cutting temperature is critical for unlocking the secrets of sawblade wear, lifespan, and the metallurgical alterations beneath the surface. This paper describes an investigation into the temperature of 45 steel during dry sawing, using a cemented carbide circular saw blade under variou...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Coatings (Basel) 2023-04, Vol.13 (4), p.758
Hauptverfasser: Wang, Yangyu, Wang, Zheng, Ni, Pengcheng, Wang, Dejie, Lu, Yanhui, Lu, Hui, Guo, Shenghao, Chen, Zhenzhen
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Studying the cutting temperature is critical for unlocking the secrets of sawblade wear, lifespan, and the metallurgical alterations beneath the surface. This paper describes an investigation into the temperature of 45 steel during dry sawing, using a cemented carbide circular saw blade under various cutting conditions. A temperature acquisition system was developed, enabling the determination of the average temperature of the arc zone in the workpiece and the temperature of the sawtooth tip via a semi-automated thermocouple measurement and an embedded dynamic artificial thermocouple method, respectively. Results obtained from these two methods indicate a positive correlation between the sawing temperature and the saw blade speed and feed rate, with an optimal combination of cutting process parameters identified for maintaining stability within reasonable ranges. Finite element simulations reveal a cyclical fluctuation in temperature along the workpiece surface and sawtooth, with a gradual decrease after an increase in the intermittent step, and confirm the relationship between the sawing temperature and the saw blade and feed rates observed experimentally. Overall, this study presents valuable insights into the temperature changes occurring during the sawing process, with important implications for improving productivity and maintaining stability in industrial applications.
ISSN:2079-6412
2079-6412
DOI:10.3390/coatings13040758