Bearing Capacity of Strip Footings Seated on Unreinforced and Geosynthetic-Reinforced Granular Layers over Spatially Variable Soft Clay Deposits

AbstractIn the literature, the influence of spatial variability of the undrained shear strength of foundation soils on the bearing capacity of footings is limited to footings seated directly on the foundation. This is an unlikely arrangement in practice. This paper revisits the footing problem by considering a thin granular layer between a strip footing and soft foundation soil using analytical and stochastic numerical modeling. The analyses are extended to the case of a geosynthetic-reinforced granular layer and to the idealized case of no granular layer. The study shows that the probability that the ultimate bearing capacity for the footing is smaller than the deterministic design value is greater for all three scenarios with randomly uniform clay soil than for the same soil with isotropic or anisotropic spatial variability of strength at practical levels of reliability index β (e.g., β≥3.09 for a permanent footing). The reason for this outcome, which may appear counterintuitive, is explained. Design charts are provided to estimate the deterministic design bearing capacity of a rigid strip footing required to meet a range of target reliability index for the three footing scenarios examined in this study.