Repurposing a Geothermal Exploration Well as a Deep Borehole Heat Exchanger: Understanding Long-Term Effects of Lithological Layering, Flow Direction, and Circulation Flow Rate

In the drive to achieve net-zero carbon emissions, decarbonisation of heating is essential. This can be facilitated by geothermal energy, but drilling geothermal wells is associated with high risks and costs. The use of preexisting wells (e.g., exhausted hydrocarbon wells or failed geothermal explor...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Sustainability 2023-03, Vol.15 (5), p.4140
Hauptverfasser: Kolo, Isa, Brown, Christopher S, Falcone, Gioia, Banks, David
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In the drive to achieve net-zero carbon emissions, decarbonisation of heating is essential. This can be facilitated by geothermal energy, but drilling geothermal wells is associated with high risks and costs. The use of preexisting wells (e.g., exhausted hydrocarbon wells or failed geothermal exploration boreholes) offsets this cost while potentially turning liabilities into assets. The Newcastle Science Central Deep Geothermal Borehole (NSCDGB) is a geothermal exploration well that was drilled to target the Carboniferous Fell Sandstone Formation at 1418.5 to 1795 m depth. However, low hydraulic conductivities prevented the development as a conventional “wet” geothermal abstraction well; therefore, new alternative methods of development are being explored. This work investigates the repurposing of the NSCDGB as a deep borehole heat exchanger (DBHE), focusing on the sustainable operation of the system in the long term by employing a constant heat load designed to contribute to local buildings or a heat network. Numerical modelling was undertaken by using OpenGeoSys software to analyse the thermal and hydraulic performance of the system. Both homogeneous and heterogeneous models were developed to compare the influence of lithological layering in contrast to a homogeneous (nonstratified) subsurface geological model. Results from homogeneous simulations modelling the DBHE to a depth of 922 m show that a 50-kW heat load can be supported for a lifetime of 25 years. This corresponds to a 65-kW building load when coupled to a heat pump with a coefficient of performance of 4.33. Thus, the DBHE could meet up to 72% of the heat demand of the adjacent urban sciences building. Rather than being a purely hypothetical case study, this work considers a real existing borehole, adjacent to a building cluster which could make use of the geothermal heat. Heterogeneity, which has been considered for the first time at the NSCDGB site, exhibits a minor impact in comparison to homogeneous simulation results. Flow direction and mass flow rate also exhibited small effects on the system performance, whereas if the exploration well could be repurposed to increased depths, the heat load could be increased. This is the first study of a coaxial DBHE at the NSCDGB site considering long-term effects of mass flow rate, heterogeneity, and flow direction. The study evaluates the feasibility of repurposing an exploratory geothermal well in the UK as a DBHE that can be used as a low-carbon hea
ISSN:2071-1050
2071-1050
DOI:10.3390/su15054140