Leaf‐Like TENGs for Harvesting Gentle Wind Energy at An Air Velocity as Low as 0.2 m s−1

Existing technologies for harvesting electrical energy from gentle wind face an enormous challenge due to the limitations of cut‐in and rated wind speed. Here, a leaf‐like triboelectric nanogenerator (LL‐TENG) is proposed that uses contact electrification caused by the damped forced vibration of topology‐optimized structure consisting of flexible leaf, vein bearing plate, and counterweight piece. The effectiveness of the topology‐optimized leaf‐like structure is studied, which solves the problem of reduced output due to electrostatic adsorption between the leaf surfaces while reducing the cut‐in (0.2 m s−1) and rated wind speed (2.5 m s−1). The LL‐TENG unit having small dimensions of 40 cm−2 (mass of 9.7 g) at a gentle wind of 2.5 m s−1 exhibits outstanding electrical performances, which produces an open‐circuit voltage of 338 V, a short‐circuit current of 7.9 µA and the transferred charge density of 62.5 µC m−2 with a low resonant frequency of 4 Hz, giving an instantaneous peak power of 2 mW. A distributed power source consists of the five LL‐TENGs in parallel is developed by designed self‐adaptive structure, for which the peak power output reaches 3.98 mW, and its practicability and durability are successfully demonstrated. This study is a promising distributed power source technology to drive electronics in gentle wind outdoor environments. For high‐efficiency harvesting electrical energy from gentle wind, a leaf‐like triboelectric nanogenerator is developed based on damped forced vibration caused by the topology‐optimized structure. The cut‐in and rated wind speed are reduced to 0.2 m s−1 and 2.5 m s−1, a distributed power source for which the peak power reaches 3.98 mW.