RETRACTED ARTICLE: Study the influence of using guide vanes blades on the performance of cross-flow wind turbine

A cross-flow wind turbine has a high torque coefficient at a low tip speed ratio; therefore, it is a good candidate for a self-starting turbine. This study aims to investigate the best configuration between guide vanes and cross-flow vertical axis wind turbine. The experiment test was carried out to determine the turbine with the highest power coefficient. The cross-flow turbine has 14, 18, and 22 blades with using 6,10 and 14 blades of guide vane (GV) was developed in this study, employing 15°, 25°, 35°, 45°, 55°, 65°, and 75° of tilt angles in fifth different wind speed conditions 4 m/s, 6 m/s, 7.5 m/s, 9.20 m/s, and 11 m/s. The turbine has 22 blades with 14 GV blades at 55° of tilt angle blades producing more remarkable turbine performance improvement than other blades. The highest power coefficient (CP) of cross-flow using 14 GV blades at 55° was 0.0162 at 0.289 TSR, which increased around 59% of the turbine's performance using GV.