Test of KW Class Photonic Microwave Generation Using Vanadium-Compensated 6H-SiC PCSS and Burst-Mode-Operation Pulse Laser

Photoconductive semiconductors operating in linear mode can be used for adaptive high-power microwave (HPM) generators by modulating incident light. This paper presents the design scheme and preliminary test results of a narrowband kW class adaptive photonic microwave generator by employing a wide-b...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE photonics journal 2023-02, Vol.15 (1), p.1-7
Hauptverfasser: Niu, Xinyue, Wu, Qilin, Wang, Bin, Yao, Jinmei, Chu, Xu, Yi, Muyu, Gu, Yanran, Wang, Langning, Xun, Tao, Yang, Hanwu
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Photoconductive semiconductors operating in linear mode can be used for adaptive high-power microwave (HPM) generators by modulating incident light. This paper presents the design scheme and preliminary test results of a narrowband kW class adaptive photonic microwave generator by employing a wide-bandgap semi-insulating 6H-SiC photoconductive semiconductor and a burst-mode laser. The experimental scheme of the generator is described along with the circuit simulation of the radio frequency generator. The laser operated at a wavelength of 532 nm with a pulse width of 100 ns and a repetition rate of 100 Hz. The laser modulates the frequencies of the generated microwave, and preliminary tests are conducted in the frequency range of 0.8-1.2 GHz. The maximum output microwave power of the designed scheme reaches up to 2.6 kW when the bias voltage is 10 kV. The results confirm that this method can be used for high-power frequency-adjustable microwave signal generation. The microwave source system presented in this paper has continuously adjustable frequency and flexible waveform control.
ISSN:1943-0655
1943-0655
1943-0647
DOI:10.1109/JPHOT.2022.3206209