Residual stress evolution of 8YSZ:Eu coating during thermal cycling studied by Eu3+ photoluminescence piezo-spectroscopy

Thermal barrier coatings (TBCs) are widely used to protect high temperature structure parts against oxidation and corrosion. The failure mechanism study of TBCs is very important and the stress evolution is core content of failure mechanism research. In this work, a 8YSZ:Eu coating was produced via atmospheric plasma spraying (APS) method. Thermal cycling tests was carried out at 1300 ℃. The residual stress evolution of the coating was detected by a Eu3+ photoluminescence piezo-spectroscopy based on the relationship between stress and the peak position of 5D0→7F2 transition of Eu3+ ions. The failure mechanism of the 8YSZ:Eu coating was also studied. The as-sprayed 8YSZ:Eu coating contains metastable t ´ -ZrO2 and amorphous structure. The stress distribution is inhomogeneous with both compressive stress and tensile stress. After 1000 thermal cycles, the initial compressive stress changed to tensile stress due to the thermal expansion coefficients (TEC) mismatch and irreversible plastic deformation during thermal cycling. With thermal cycling going on, the compressive stress appeared again and the averaged tensile stress decreased due to the volume expansion caused by phase transformation of the t ´ -ZrO2 to m-ZrO2 and the formation of cracks. Formation of the thermally grown oxide (TGO), phase transformation, thermal expansion mismatch are factors for the coating failure. •A Eu3+ photoluminescence piezo-spectroscopy was used to measure the residual stress.•The residual stress distribution and evolution of the 8YSZ:Eu layer during thermal cycling was studied.•A 8YSZ:Eu coating was prepared by atmospheric plasma spraying and thermal cycling behavior was studied.