Effect of inflow conditions on transonic turbine airfoil limit loading

To better understand airfoil limit loading and the effect inflow conditions have on local efficiency, a computational fluid dynamic investigation was performed for four different transonic turbine airfoils under sub-critical, critical, and supercritical conditions. A computational baseline was established using data previously collected at the Pratt and Whitney Canada High-Speed Wind Tunnel at Carleton University near design conditions using the Reynolds-Averaged Naiver-Stokes shear stress transport k − ω turbulence model with γ transition. The effects of inflow conditions on aerodynamic performance were examined by varying incidence by ± 20°, mainstream turbulence intensity from 5 to 20% and mainstream turbulent length scale from 1 to 100% of the airfoil pitch. Quantitative data of mass-flow averaged Mach numbers, mass-flow averaged flow angles, surface isentropic Mach number distributions and mass-flow averaged total pressure loss coefficients were collected and are presented alongside flow visualizations of numerical Schlieren images to allow for a detailed description of the entire flow domain. Similar to previous experimental work the limit loading pressure ratio and the mass-flow averaged outlet flow angle were strongly correlated with the airfoil outlet metal angle. The influence of inflow conditions was minimal on the exit flow profile with the exception of the mass-flow averaged total pressure loss coefficients. Results show incidence variation to change the total pressure loss coefficient depending on the airfoil, whereas, turbulence intensity and turbulent length scale predicted a drastic increase in loss with increased turbulence level for all airfoils considered.