Study of Mechanical Properties of SiC and Gr Reinforced Al7075 Powder Metallurgy Composites and Analysis of Results using ANOVA
The study aims at evaluating the mechanical properties of aluminium MMCs reinforced with particles of SiC and Gr prepared by powder metallurgy route. Fabricated composites are with Al7075 as matrix material with particle sizes of 24 and 50 µm and by varying SiC weight percentage from 6 to 18% in ste...
Gespeichert in:
| Veröffentlicht in: | Journal of the Institution of Engineers (India): Series D 2022-06, Vol.103 (1), p.341-348 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 348 |
|---|---|
| container_issue | 1 |
| container_start_page | 341 |
| container_title | Journal of the Institution of Engineers (India): Series D |
| container_volume | 103 |
| creator | Manjunath, T. S. Seenappa Kumar, G. B. Veeresh Kumar, M. V. Praveen Rudresh, M. |
| description | The study aims at evaluating the mechanical properties of aluminium MMCs reinforced with particles of SiC and Gr prepared by powder metallurgy route. Fabricated composites are with Al7075 as matrix material with particle sizes of 24 and 50 µm and by varying SiC weight percentage from 6 to 18% in steps of 6 wt% with a constant quantity of 4 wt% of Gr. Samples were tested for density and mechanical properties like hardness, tensile and compressive strength in accordance with the ASTM standards. Results were statistically analysed using ANOVA at 5% significance level. The results of density and mechanical properties of the composite increase with smaller particle size matrix material and increasing weight percentage of SiC reinforcement. Results of ANOVA showed that the most affecting significant factor for hardness, tensile and compressive strength was SiC wt% followed by Al7075 particle size. |
| doi_str_mv | 10.1007/s40033-021-00319-5 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2672016623</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2672016623</sourcerecordid><originalsourceid>FETCH-LOGICAL-c2345-6cb8600ed68cb945281b677b724725ffdba741f2eac21e3629cd604738687ddc3</originalsourceid><addsrcrecordid>eNp9kE1OwzAQRiMEEgh6AVaWWAfG48ROl1EFBalQVH62lmM7xSjExU6EuuMonIWTkVIEO1Yz0nzv0-glyTGFUwogzmIGwFgKSNNhoeM030kOEHNIkTLY_d0R95NRjK4CHFPgrICD5P2u682a-JpcW_2kWqdVQ26DX9nQORs3hzs3Iao1ZBo-PxbWtbUP2hpSNgJETm79m7FhoDvVNH1YrsnEv6x8dN1Ab7CyVc06uu-qhY1900XSR9cuSXkzfyyPkr1aNdGOfuZh8nBxfj-5TGfz6dWknKUaWZanXFcFB7CGF7oaZzkWtOJCVAIzgXldm0qJjNZolUZqGcexNhwywQpeCGM0O0xOtr2r4F97Gzv57Psw_BYlcoFAOUc2pHCb0sHHGGwtV8G9qLCWFORGttzKloNs-S1b5gPEtlAcwu3Shr_qf6gvQ0SBkQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2672016623</pqid></control><display><type>article</type><title>Study of Mechanical Properties of SiC and Gr Reinforced Al7075 Powder Metallurgy Composites and Analysis of Results using ANOVA</title><source>SpringerLink Journals - AutoHoldings</source><creator>Manjunath, T. S. ; Seenappa ; Kumar, G. B. Veeresh ; Kumar, M. V. Praveen ; Rudresh, M.</creator><creatorcontrib>Manjunath, T. S. ; Seenappa ; Kumar, G. B. Veeresh ; Kumar, M. V. Praveen ; Rudresh, M.</creatorcontrib><description>The study aims at evaluating the mechanical properties of aluminium MMCs reinforced with particles of SiC and Gr prepared by powder metallurgy route. Fabricated composites are with Al7075 as matrix material with particle sizes of 24 and 50 µm and by varying SiC weight percentage from 6 to 18% in steps of 6 wt% with a constant quantity of 4 wt% of Gr. Samples were tested for density and mechanical properties like hardness, tensile and compressive strength in accordance with the ASTM standards. Results were statistically analysed using ANOVA at 5% significance level. The results of density and mechanical properties of the composite increase with smaller particle size matrix material and increasing weight percentage of SiC reinforcement. Results of ANOVA showed that the most affecting significant factor for hardness, tensile and compressive strength was SiC wt% followed by Al7075 particle size.</description><identifier>ISSN: 2250-2122</identifier><identifier>EISSN: 2250-2130</identifier><identifier>DOI: 10.1007/s40033-021-00319-5</identifier><language>eng</language><publisher>New Delhi: Springer India</publisher><subject>Aluminum base alloys ; Composite materials ; Compressive strength ; Density ; Engineering ; Hardness ; Mechanical properties ; Metallurgical analysis ; Original Contribution ; Particle size ; Powder metallurgy ; Silicon carbide ; Statistical methods ; Variance analysis</subject><ispartof>Journal of the Institution of Engineers (India): Series D, 2022-06, Vol.103 (1), p.341-348</ispartof><rights>The Institution of Engineers (India) 2021</rights><rights>The Institution of Engineers (India) 2021.</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c2345-6cb8600ed68cb945281b677b724725ffdba741f2eac21e3629cd604738687ddc3</citedby><cites>FETCH-LOGICAL-c2345-6cb8600ed68cb945281b677b724725ffdba741f2eac21e3629cd604738687ddc3</cites><orcidid>0000-0003-2879-7464</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://link.springer.com/content/pdf/10.1007/s40033-021-00319-5$$EPDF$$P50$$Gspringer$$H</linktopdf><linktohtml>$$Uhttps://link.springer.com/10.1007/s40033-021-00319-5$$EHTML$$P50$$Gspringer$$H</linktohtml><link.rule.ids>314,777,781,27905,27906,41469,42538,51300</link.rule.ids></links><search><creatorcontrib>Manjunath, T. S.</creatorcontrib><creatorcontrib>Seenappa</creatorcontrib><creatorcontrib>Kumar, G. B. Veeresh</creatorcontrib><creatorcontrib>Kumar, M. V. Praveen</creatorcontrib><creatorcontrib>Rudresh, M.</creatorcontrib><title>Study of Mechanical Properties of SiC and Gr Reinforced Al7075 Powder Metallurgy Composites and Analysis of Results using ANOVA</title><title>Journal of the Institution of Engineers (India): Series D</title><addtitle>J. Inst. Eng. India Ser. D</addtitle><description>The study aims at evaluating the mechanical properties of aluminium MMCs reinforced with particles of SiC and Gr prepared by powder metallurgy route. Fabricated composites are with Al7075 as matrix material with particle sizes of 24 and 50 µm and by varying SiC weight percentage from 6 to 18% in steps of 6 wt% with a constant quantity of 4 wt% of Gr. Samples were tested for density and mechanical properties like hardness, tensile and compressive strength in accordance with the ASTM standards. Results were statistically analysed using ANOVA at 5% significance level. The results of density and mechanical properties of the composite increase with smaller particle size matrix material and increasing weight percentage of SiC reinforcement. Results of ANOVA showed that the most affecting significant factor for hardness, tensile and compressive strength was SiC wt% followed by Al7075 particle size.</description><subject>Aluminum base alloys</subject><subject>Composite materials</subject><subject>Compressive strength</subject><subject>Density</subject><subject>Engineering</subject><subject>Hardness</subject><subject>Mechanical properties</subject><subject>Metallurgical analysis</subject><subject>Original Contribution</subject><subject>Particle size</subject><subject>Powder metallurgy</subject><subject>Silicon carbide</subject><subject>Statistical methods</subject><subject>Variance analysis</subject><issn>2250-2122</issn><issn>2250-2130</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2022</creationdate><recordtype>article</recordtype><recordid>eNp9kE1OwzAQRiMEEgh6AVaWWAfG48ROl1EFBalQVH62lmM7xSjExU6EuuMonIWTkVIEO1Yz0nzv0-glyTGFUwogzmIGwFgKSNNhoeM030kOEHNIkTLY_d0R95NRjK4CHFPgrICD5P2u682a-JpcW_2kWqdVQ26DX9nQORs3hzs3Iao1ZBo-PxbWtbUP2hpSNgJETm79m7FhoDvVNH1YrsnEv6x8dN1Ab7CyVc06uu-qhY1900XSR9cuSXkzfyyPkr1aNdGOfuZh8nBxfj-5TGfz6dWknKUaWZanXFcFB7CGF7oaZzkWtOJCVAIzgXldm0qJjNZolUZqGcexNhwywQpeCGM0O0xOtr2r4F97Gzv57Psw_BYlcoFAOUc2pHCb0sHHGGwtV8G9qLCWFORGttzKloNs-S1b5gPEtlAcwu3Shr_qf6gvQ0SBkQ</recordid><startdate>20220601</startdate><enddate>20220601</enddate><creator>Manjunath, T. S.</creator><creator>Seenappa</creator><creator>Kumar, G. B. Veeresh</creator><creator>Kumar, M. V. Praveen</creator><creator>Rudresh, M.</creator><general>Springer India</general><general>Springer Nature B.V</general><scope>AAYXX</scope><scope>CITATION</scope><orcidid>https://orcid.org/0000-0003-2879-7464</orcidid></search><sort><creationdate>20220601</creationdate><title>Study of Mechanical Properties of SiC and Gr Reinforced Al7075 Powder Metallurgy Composites and Analysis of Results using ANOVA</title><author>Manjunath, T. S. ; Seenappa ; Kumar, G. B. Veeresh ; Kumar, M. V. Praveen ; Rudresh, M.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c2345-6cb8600ed68cb945281b677b724725ffdba741f2eac21e3629cd604738687ddc3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2022</creationdate><topic>Aluminum base alloys</topic><topic>Composite materials</topic><topic>Compressive strength</topic><topic>Density</topic><topic>Engineering</topic><topic>Hardness</topic><topic>Mechanical properties</topic><topic>Metallurgical analysis</topic><topic>Original Contribution</topic><topic>Particle size</topic><topic>Powder metallurgy</topic><topic>Silicon carbide</topic><topic>Statistical methods</topic><topic>Variance analysis</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Manjunath, T. S.</creatorcontrib><creatorcontrib>Seenappa</creatorcontrib><creatorcontrib>Kumar, G. B. Veeresh</creatorcontrib><creatorcontrib>Kumar, M. V. Praveen</creatorcontrib><creatorcontrib>Rudresh, M.</creatorcontrib><collection>CrossRef</collection><jtitle>Journal of the Institution of Engineers (India): Series D</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Manjunath, T. S.</au><au>Seenappa</au><au>Kumar, G. B. Veeresh</au><au>Kumar, M. V. Praveen</au><au>Rudresh, M.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Study of Mechanical Properties of SiC and Gr Reinforced Al7075 Powder Metallurgy Composites and Analysis of Results using ANOVA</atitle><jtitle>Journal of the Institution of Engineers (India): Series D</jtitle><stitle>J. Inst. Eng. India Ser. D</stitle><date>2022-06-01</date><risdate>2022</risdate><volume>103</volume><issue>1</issue><spage>341</spage><epage>348</epage><pages>341-348</pages><issn>2250-2122</issn><eissn>2250-2130</eissn><abstract>The study aims at evaluating the mechanical properties of aluminium MMCs reinforced with particles of SiC and Gr prepared by powder metallurgy route. Fabricated composites are with Al7075 as matrix material with particle sizes of 24 and 50 µm and by varying SiC weight percentage from 6 to 18% in steps of 6 wt% with a constant quantity of 4 wt% of Gr. Samples were tested for density and mechanical properties like hardness, tensile and compressive strength in accordance with the ASTM standards. Results were statistically analysed using ANOVA at 5% significance level. The results of density and mechanical properties of the composite increase with smaller particle size matrix material and increasing weight percentage of SiC reinforcement. Results of ANOVA showed that the most affecting significant factor for hardness, tensile and compressive strength was SiC wt% followed by Al7075 particle size.</abstract><cop>New Delhi</cop><pub>Springer India</pub><doi>10.1007/s40033-021-00319-5</doi><tpages>8</tpages><orcidid>https://orcid.org/0000-0003-2879-7464</orcidid></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 2250-2122 |
| ispartof | Journal of the Institution of Engineers (India): Series D, 2022-06, Vol.103 (1), p.341-348 |
| issn | 2250-2122 2250-2130 |
| language | eng |
| recordid | cdi_proquest_journals_2672016623 |
| source | SpringerLink Journals - AutoHoldings |
| subjects | Aluminum base alloys Composite materials Compressive strength Density Engineering Hardness Mechanical properties Metallurgical analysis Original Contribution Particle size Powder metallurgy Silicon carbide Statistical methods Variance analysis |
| title | Study of Mechanical Properties of SiC and Gr Reinforced Al7075 Powder Metallurgy Composites and Analysis of Results using ANOVA |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-19T02%3A10%3A45IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Study%20of%20Mechanical%20Properties%20of%20SiC%20and%20Gr%C2%A0Reinforced%20Al7075%20Powder%20Metallurgy%20Composites%20and%20Analysis%20of%20Results%20using%20ANOVA&rft.jtitle=Journal%20of%20the%20Institution%20of%20Engineers%20(India):%20Series%20D&rft.au=Manjunath,%20T.%20S.&rft.date=2022-06-01&rft.volume=103&rft.issue=1&rft.spage=341&rft.epage=348&rft.pages=341-348&rft.issn=2250-2122&rft.eissn=2250-2130&rft_id=info:doi/10.1007/s40033-021-00319-5&rft_dat=%3Cproquest_cross%3E2672016623%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2672016623&rft_id=info:pmid/&rfr_iscdi=true |