Numerical and experimental investigation of flat-clinch joint strength

The striving for energy savings by lightweight construction requires the combination of different materials with advantageous properties. For joining sheet metal components, clinching offers a good alternative to thermal joining processes. In contrast to thermal joining processes, the microstructure in the joining zone remains largely unaffected. Conventional clinch joints, however, have a protrusion on the underside of the joint, which restricts their use in functional and visible surfaces. Flat-clinching minimizes this disadvantage by using a flat anvil instead of a die. Due to the flatness on the underside, it can be used in visible and functional surfaces. This paper deals with the increase of joint strength by using an auxiliary joining element (AJE) in the second forming stage. To achieve optimum improvement in the joint strength of an aluminum Al99.5 H14 sheet metal joint and to save costs, the AJE was varied numerically in terms of volume, material and basic shape. The geometric parameters (e.g., interlocking f and neck thickness t n ) do not allow direct derivation of the joint strength. For this reason, the 2D clinch model was extended for the first time to include 3D load models (cross tension, shear tension). To validate the numerical results, optimized flat-clinch joints with AJE and the associated load tests were implemented experimentally. The numerical models were used to improve the process development.