A Model for Positive Corona Inception From Charged Ellipsoidal Thundercloud Hydrometeors

Lightning is observed to incept in thundercloud electric fields below the threshold value Ek for discharge initiation. To explain this, the local enhancement of the electric field by hydrometeors is considered. The conditions for the onset of positive corona discharges are studied in air for ellipsoidal geometries. A hydrometeor is simulated as an individual charged conductor in zero ambient field; there is only a field generated by the charge on the hydrometeor surface. By doing so, the feasibility of corona inception from ellipsoidal hydrometeors can be formulated based on the self‐sustaining condition of electron avalanches. For hydrometeor dimensions of a few millimeters and typical thundercloud pressure, values above 2.4 Ek are found for the onset electric field at the tip of the ellipsoid. From simulations the required ambient electric field for corona onset from an uncharged hydrometeor can then be derived. This results in values between 0.07 Ek and 0.8 Ek for semiaxes aspect ratios between 0.01 and 1. The charge required on the hydrometeor surface for corona onset for typical pressures is minimum for semiaxes aspect ratios increasing from 0.12 to 0.22 for decreasing hydrometeor volume from 42 to 4.2 mm3. For representative simulated hydrometeors, onset charges are between 495 and 2,430 pC. For a hydrometeor volume of 4.2 mm3 results are comparable to measured precipitation charges for aspect ratios between 0.16 and 0.32. From the results it is concluded that corona onset from ellipsoidal hydrometeors of a realistic volume can be achieved in thundercloud conditions for certain aspect ratios. Key Points Corona onset through hydrometeors is modeled using the self‐sustaining condition of electron avalanches An optimal ellipsoidal aspect ratio of 0.2 for corona inception for representative conditions is found Corona inception via ellipsoidal hydrometeors is found to be achievable in thundercloud conditions