Low frequency vibratory cleaning of paint and rust contaminants from machines parts

This work investigates the effect of low frequency vibratory processing for cleaning and washing various machine components parts from rusts and old paints deposits. The experimental investigation was carried out with special prepared samples that were weighted and exposed to paints and rust contaminants. These samples were treated in universal horizontal vibration machine UVHM 4 × 10 with different combination of instrumental processing medium, process fluid, machine amplitude and frequency of oscillations. They were periodically reweighted after processing and compared to etalon with control of quantity of dust that have been removed, sample cleanliness and also other functional parameters. Statistical analysis has been used to characterize ongoing process and full factorial analysis to establish experimental parameters dependency. The result is showing the complex dependence of samples cleanliness to each processing parameters like processing time, amplitude of oscillations, frequency of oscillations, process fluid parameters, instrumental medium, etc. Between this parameters although the most important successively the amplitude of oscillations, the frequency of oscillations the processing medium and the processing fluid depending to his considered composition, the optimal processing time can be reach only by complex combination of all this parameters every of them carry an amplify coefficient. Low frequency oscillations can be used to monitor and optimize washing and cleaning operations of paints and rusts contaminations. That guarantees process automation, its effectiveness for a large industrial application.