Towards High-performance Lithium-Sulfur Batteries: the Modification of Polypropylene Separator by 3D Porous Carbon Structure Embedded with Fe3C/Fe Nanoparticles
L ithium-sulfur(Li-S) batteries with high energy densities have received increasing attention. However, the electrochemical performance of Li-S batteries is still far from the satisfactory of the practical application, which can be mainly attributed to the shuttling of polysulfides and the slow reac...
Gespeichert in:
Veröffentlicht in: | Chemical research in Chinese universities 2022-02, Vol.38 (1), p.147-154 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | L
ithium-sulfur(Li-S) batteries with high energy densities have received increasing attention. However, the electrochemical performance of Li-S batteries is still far from the satisfactory of the practical application, which can be mainly attributed to the shuttling of polysulfides and the slow reaction kinetics of polysulfide conversion. To address this issue, a 3D porous carbon structure constructed by 2D N-doped graphene and 1D carbon nanotubes with embedded Fe
3
C/Fe nanoparticles(NG@Fe
3
C/Fe) was designed and prepared by a simple programmed calcination method for the modification of polypropylene(PP) separator. The Fe
3
C/Fe nanoparticles demonstrate an excellent catalytic conversion and strong chemisorption towards polysulfides, while the unique architecture of N-doped graphene promotes the Li
+
/electron transfer and the physical adsorption of polysulfides. The electrochemical performance of the Li-S batteries with the NG@Fe
3
C/Fe-modified separator is significantly improved. A large discharge capacity of 1481 mA·h·g
−1
is achieved at 0.2 C, and a high capacity of 601 mA·h·g
−1
is maintained after discharged/charged for 500 cycles at a current rate of 1 C. This work provides a new approach for the development of high-performance Li-S batteries through the modification of the PP separator by rationally designed composites with large adsorption capability to polysulfides, good wettability to the electrolyte and high catalytic property. |
---|---|
ISSN: | 1005-9040 2210-3171 |
DOI: | 10.1007/s40242-021-1386-x |