An Analytical Elastic Solution for Right-Angle Trapezoidal Opening in Steeply Inclined Coal Seam

In the process of underground mining, steeply inclined rocks or coal seams are often encountered, forming the openings of right-angle trapezoid. According to the geological conditions of a mining project in China, an analytical elastic solution of stress and displacement around right-angle trapezoid...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Processes 2022-01, Vol.10 (1), p.110
Hauptverfasser: Bu, Wankui, Xu, Hui, Ji, Ming
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In the process of underground mining, steeply inclined rocks or coal seams are often encountered, forming the openings of right-angle trapezoid. According to the geological conditions of a mining project in China, an analytical elastic solution of stress and displacement around right-angle trapezoidal opening in a homogeneous, isotropic, and linear elastic geomaterial is presented, which is based on the evaluation of the conformal mapping representation by an appropriate numerical calculation and the complex potential functions. The different results from other shaped openings are shown as follows. In a right-angle trapezoidal opening, the maximum displacements of roof falling occur on the low side, while the most horizontal displacements on the low side are around the roof and the most horizontal displacements on the high side are around the middle of the high side in this opening. These results are also compared with the numerical calculations in FLAC software, illustrating that the solution may be easily applied to rock mechanics or rock engineering for understanding the deformation of floor heave and roof falling down. The solution is also suitable for optimum design of bolt supporting in a right-angle trapezoidal opening, which is different from the traditional concept of symmetrical bolt supporting. Finally, a methodology is proposed for the estimation of conformal mapping coefficients for a given cross-sectional shape of an opening without symmetrical axis.
ISSN:2227-9717
2227-9717
DOI:10.3390/pr10010110