Static reservoir modeling using stochastic method: a case study of the cretaceous sequence of Gamtoos Basin, Offshore, South Africa
Gamtoos Basin is an echelon sub-basin under the Outeniqua offshore Basin of South Africa. It is a complex rift-type basin with both onshore and offshore components and consists of relatively simple half-grabens bounded by a major fault to the northeast. This study is mainly focused on the evaluation...
Gespeichert in:
Veröffentlicht in: | Journal of Petroleum Exploration and Production Technology 2021-12, Vol.11 (12), p.4185-4200 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Gamtoos Basin is an echelon sub-basin under the Outeniqua offshore Basin of South Africa. It is a complex rift-type basin with both onshore and offshore components and consists of relatively simple half-grabens bounded by a major fault to the northeast. This study is mainly focused on the evaluation of the reservoir heterogeneity of the Valanginian depositional sequence. The prime objective of this work is to generate a 3D static reservoir model for a better understanding of the spatial distribution of discrete and continuous reservoir properties (porosity, permeability, and water saturation). The methodology adopted in this work includes the integration of 2D seismic and well-log data. These data were used to construct 3D models of lithofacies, porosity, permeability, and water saturation through petrophysical analysis, upscaling, Sequential Indicator Simulation, and Sequential Gaussian Simulation algorithms, respectively. Results indicated that static reservoir modeling adequately captured reservoir geometry and spatial properties distribution. In this study, the static geocellular model delineates lithology into three facies: sandstone, silt, and shale. Petrophysical models were integrated with facies within the reservoir to identify the best location that has the potential to produce hydrocarbon. The statistical analysis model revealed sandstone is the best facies and that the porosity, permeability, and water saturation ranges between 8 and 22%, 0.1 mD ( |
---|---|
ISSN: | 2190-0558 2190-0566 |
DOI: | 10.1007/s13202-021-01306-y |