Studying Magnetic Field Variations Accompanying the 2011 June 7 Eruptive Event, by Using Nonlinear Force-Free Field Modeling

We study the features of the magnetic field variations within the 2011 June 7 eruptive event that includes a large filament eruption, a flare, and a CME formation. The magnetic field characteristics were obtained by using vector measurements of the magnetic field with the SDO/HMI and 3D magnetic field calculations based on nonlinear force-free field (NLFFF) modeling. Strong and relatively fast variations in the photospheric field characteristics after the flare onset are shown to be observed only within a small site ( 20 ″ × 20 ″ ) of the eruption region in the neighborhood of the polarity inversion line (PIL). We found that the magnetic field strength, the electric current density, current helicity density and free magnetic energy density above this region are growing with height reaching their maximums at the level of ∼15 Mm. After 2011 July 7 00:00 UT, this height started gradually reducing. The NLFFF extrapolation revealed the presence of a magnetic flux rope elongated approximately along the main PIL and an arcade of magnetic field lines over it. The flux-rope axis is located at height of ∼15 Mm. The flux-rope footpoints approximately coincide with the eruptive filament footpoints. Thus, we concluded that the detected flux rope is associated with the magnetic structure of the observed filament. The detected strong variation of the magnetic field within the eruption region are most probably associated with the magnetic field reconfiguration after the filament eruption. The T n parameter, which is the average magnetic field twist within the flux rope, was found to increase up to 2.5 rotations before the flare onset, and to dramatically decrease afterward. This may reflect the developing of kink instability that presumably triggered this eruption.