Obtaining and Research of Additive Products from Electroerosive Cobalt-Chrome Powders

Based on the particularity of the methods of obtaining spherical shape powders in order to obtain spherical granules of a regulated grain size, the technology of electroerosive dispersion, which is distinguished by relatively low energy costs and ecological cleanliness of the process, is described. The widespread use of the method of EED for the processing of metal waste into powders for the purpose of their reuse and application in additive technologies is constrained by the lack of complete information in the scientific and technical literature about the influence of the original composition, modes and media on the properties of powders and technologies of practical application. Therefore, the development of technologies for the reuse of EED powders and the evaluation of the effectiveness of their use requires the conduct of comprehensive theoretical and experimental studies. The purpose of this work was to obtain and study additive products from electroerosive cobalt-chromium powders of a specific particle size distribution and to study their microstructure. The granulometry of the obtained powders was determined on a laser analyzer of particle sizes "Analysette 22 NanoTec". The microstructure of additive samples from cobalt-chromium powders was investigated by optical microscopy on an inverted optical microscope OLYMPUS GX51. On the basis of completed studies, aimed at obtaining and studying additive products from electroerosive cobalt-chrome powders of a specific particle size distribution, and studying their microstructure, it was found that additive samples, obtained from a cobalt-chrome powder with an average particle size of 35.68 μm, have practically no pores.