The recrystallization behaviors of hot-rolled W-TiC plates

This work described an experimental investigation on the recrystallization behaviors of the hot-rolled particle strengthened W (PSW) material. Upon annealing, the three processes, that is, recovery, recrystallization and grain growth, proceed in a discontinuous fashion for our PSW material, and two or more processes could simultaneously occur in local regions. At an annealing temperature spanning from 1300 °C to 1500 °C, recovery is in the dominant position which is verified by deformed grains over half of the whole, accompanying with a gentle decrease in hardness. Meanwhile, recrystallization nucleation, primary recrystallization and abnormal grain growth is identified at 1300 °C, 1400 °C and 1500 °C, respectively. Further increasing the annealing temperature to 1600 °C and 1700 °C, normal grain growth takes precedence over recovery, along with a marked reduction in hardness. TEM observations show that owing to microstructural heterogeneity induced by particle dispersion, local regions have an advantage in terms of strain energy storage over other regions during hot rolling, enabling a preferential recrystallization nucleation at 1300 °C; whereas nanosized TiC particles are capable of inhibiting grain growth at elevated temperature, and thus retard the recrystallization rate. In addition, our as-rolled PSW material exhibits a different texture, and the dominant α-fiber of {100}〈011〉 and {112}〈1−10〉 transforms into γ-fiber texture of {111}〈011〉 and {111}〈−1−12〉 during recrystallization. •A discontinuous recrystallization process was revealed in the material.•The unique recrystallization behavior stems from microstructure heterogeneity.•Significant texture evolution does occur during the recrystallization process.