Investigation of Aspects of High-Speed Sintering of Plasma-Chemical Nanopowders of Tungsten Carbide with Higher Content of Oxygen

The special aspects of spark plasma sintering (SPS) of plasma-chemical nanopowders of tungsten carbide with higher oxygen content were investigated. It was demonstrated that shrinkage rate of the WC nanopowders during SPS is limited by the rate of grain-boundary diffusion with the abnormally low values of activation energy. Decrease in the activation energy of SPS is caused by the influence of oxygen on the diffusion permeability of boundaries of the tungsten carbide grains at the stage of intense densification, as well as by abnormal grain growth. Kinetics of SPS of the WC-W 2 C-WO 3 -W nanopowder compositions at the stage of severe densification is controlled by the rate of sticking together the oxide particles, with their simultaneous transformation into W 2 C particles, and then by the plastic flow of W 2 C particles in the presence of the tungsten particles at the stage of high-temperature sintering. Ceramics with a high density ratio (98–99%) and ultra-fine-grained structure (the mean grain size less than 0.3 μm) with higher hardness HV = 30.5 GPa and fracture toughness of ~6.5 MPa m 1/2 were obtained using the SPS method.