Environmental conditions and the performance of free water surface flow constructed wetland: a multivariate statistical approach

During the past three decades, constructed wetlands have become an integral part of the suite of technologies for removing domestic and industrial wastewater contaminants. The use of constructed wetlands has disproportionately focused on domestic and agricultural wastewaters and storm water runoff and less on oil and gas-related produced water. In this context, the cumulative effect of environmental factors on the treatment/removal efficiency of contaminants in produced water is underserved by research. Therefore, this study assessed the effect of environmental factors (temperature, dissolved oxygen, oxidation–reduction potential, and pH) on contaminant removal efficiency in free water surface flow constructed wetland (FWSFCW) using ordinary least squares regression and experimental data from a waste treatment facility in Ghana. The results showed that environmental factors did not systematically vary across the experimental group and control set-up. Generally, the environmental factors explained relatively far less of the variance in contaminant removal efficiency compared with the plant species ( Typha latifolia, Ruellia simplex and Alternanthera philoxeroides ). Environmental factors cumulatively explained only 1.3%, 16.4%, 22.6%, and 5.6% of the variance in removal efficiency of BOD, COD, oil and grease, and total coliform bacteria, respectively. Temperature was the most important environmental predictor of the removal of BOD and phosphorus whereas DO was most important for removing nitrates and total coliform bacteria. ORP and pH were the most important predictors of COD, and oil and grease, respectively. These findings underscore the complex relationships among environmental factors and contaminant removal efficiency and the need for contaminant management practices and remedial techniques that address these complexities.