Laser‐Induced NanoKneading (LINK): Deformation of Patterned Azopolymer Nanopillar Arrays via Photo‐Fluidization

Ordered arrays of polymer nanostructures have been widely investigated because of their promising applications such as solar‐cell devices, sensors, and supercapacitors. It remains a great challenge, however, to manipulate the shapes of individual nanostructures in arrays for tailoring specific properties. In this study, an effective strategy to prepare anisotropic polymer nanopillar arrays via photo‐fluidization is presented. Azobenzene‐containing polymers (azopolymers) are first infiltrated into the nanopores of ordered anodic aluminum oxide (AAO) templates. After the removal of the AAO templates using weak bases, azopolymer nanopillar arrays can be prepared. Upon exposure of linearly polarized lights, azobenzene groups in the azopolymers undergo trans–cis–trans photoisomerization, causing mass migration and elongation of the nanopillar along with the polarization directions. As a result, anisotropic nanopillar arrays can be fabricated, of which the deformation degrees are controlled by the illumination times. Furthermore, patterned nanopillar arrays can also be constructed with designed photomasks. This work presents a practical and versatile strategy to fabricate arrays of anisotropic nanostructures for future technical applications. An effective strategy to prepare anisotropic polymer nanopillar arrays via photo‐fluidization is presented. Azopolymers are first infiltrated into the nanopores of ordered anodic aluminum oxide templates. Upon exposure of linearly polarized lights, azobenzene groups in the azopolymers undergo trans–cis–trans photoisomerization, causing mass migration and elongation of the nanopillar along with the polarization directions.