Mechanisms of the Origin of Fine and Non-Dendritic Grains at the Sonotrode–Liquid Metal Interface During Ultrasonic Solidification of Metals

Proposed grain refinement mechanisms during ultrasonic solidification have been explained in terms of refinement between cavitation enhanced nucleation and fragmentation of dendrites according to the casting conditions. Solidification studies also describe the activation of nucleation under pressure pulses after bubble implosion as an additional supporting mechanism for grain refinement. This study clarifies some overlooked concepts and proposes a plausible grain refinement mechanism explaining the role of cavitation in pure Zn and a Mg–6 wt pct Zn alloy. Equivalent grain size and grain density have been obtained in pure Zn and the Mg–6 wt pct Zn alloy (grain size distribution ranging from 40 to 200 µ m) when UST was applied after the onset of solidification. These fine, non-dendritic grains originate from the cavitation zone beneath the sonotrode. Significant thermal undercooling surrounding the low superheat sonotrode in contact with the melt is responsible for the formation of a solidified layer (typically the thickness is equivalent to the average grain diameter) at the sonotrode–melt interface. High-frequency vibrations with or without cavitation at this interface assist the separation of these fine grains, which are then carried into the melt by acoustic streaming. A possible mechanism for the separation of fine grains produced from the cavitation zone is explained with the help of established concepts reported for the ultrasonic atomization process.