Highly sensitive non-enzymatic electrochemical glucose biosensor based on PANI: β12 Borophene

Glucose is one of the main clinical biomarkers which can lead to the micro/macrovascular complications of diabetes. Borophene nanosheets were prepared by ultrasonic sonication. Borophene nanosheets were obtained with β 12 phase crystalline structure. Then, randomly grown PANI: Borophene nanonetwork was prepared. Glucose sensing performance of Borophene and PANI: Borophene-based non-enzymatic electrochemical biosensors were investigated in detail with in a comparison of the prepared PANI-based biosensor. LOD and LOQ for PANI: β 12 Borophene-based electrochemical sensor are 0.5 mM and 1.7 mM and for PANI-based electrochemical sensor are 1.2 mM and 3.9 mM, respectively. It can be seen that the prepared PANI: β 12 Borophene-based electrochemical sensor demonstrates a good improvement over previous reports for glucose sensing using PANI. PANI: Borophene-based biosensor detected 1–12 mM glucose with the sensitivity of 96.93 μAmM −1 cm −2 during 1 min cyclic voltammetry measurement. The results reveal that Borophene enhanced the glucose sensing sensitivity of PANI. PANI: Borophene-based biosensor has higher sensitivity and better stability.