Optimisation solar and wind hybrid energy for model catamaran ship
Based on WindSat data from 2004 to 2014, Indonesia has an average wind speed of above 8m/second at sea. In addition, the energy potential of the sun is around 4.8 kWh/m 2 . A mechanical model ship with a catamaran type will be installed photovoltaic module and wind turbine generator which are equipp...
Gespeichert in:
Veröffentlicht in: | IOP conference series. Materials Science and Engineering 2021-02, Vol.1073 (1), p.12044 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Based on WindSat data from 2004 to 2014, Indonesia has an average wind speed of above 8m/second at sea. In addition, the energy potential of the sun is around 4.8 kWh/m
2
. A mechanical model ship with a catamaran type will be installed photovoltaic module and wind turbine generator which are equipped with microprocessor to control the angle of the wind turbine blades, the energy generated by the PV and wind turbine generator will be regulated by the dual input buck boost converter using the PID method to regulated voltage to 14 Volt used to charge the battery. The power stored in the battery will be used to drive the ship model propulsion system. This paper discusses about pv performance, generator performance, dual input buck boost calculation, and simulation. From testing the energy obtained is 774WH. From the simulation of the dual input buck boost converter circuit, the setling time is 11ms when using the PID control system and 35ms when using PI. Energy from the sun and wind can be combined into one with a dual input buck boost converter so that the energy can be absorbed is more optimal. |
---|---|
ISSN: | 1757-8981 1757-899X |
DOI: | 10.1088/1757-899X/1073/1/012044 |