Adhesively bonded joints in components manufactured via selective laser melting

Additive manufacturing has gained increasing attention in recent years in numerous industrial sectors due to its inherent characteristics, e.g. tool-free production and unprecedented freedom of design. However, in some applications such as heat exchangers the design has to follow certain restrictions, e.g. to allow for the removal of unfused powder, which can be enclosed in cavities. Moreover, in case multi-material parts are considered, the use of different powders during processing is often uneconomical since powder recycling is highly challenging. Therefore, the production of complex structures being characterized by limited accessibility and components made of different materials often require a subsequent joining process. Based on an analysis of state-of-the-art joining technologies employed for additively manufactured metal components, research gaps related to adhesive bonding are deduced. In light of the prevailing gaps, the influence of selective laser melting process parameters like laser power and build direction on the surface topography and, thus, on the bondability of the substrates are investigated. The mechanical tests reveal a high bond strength for the vertically oriented samples and the samples manufactured with a laser power of 400 W. Furthermore, a laser post-treatment of the SLM samples lead to an improvement of lap shear strength. Finally, results reporting on the ageing behaviour of these joints and an outlook on further research activities are given.