Developing a M6C-Reinforced High-Cr White Iron for Abrasive Wear Application

Fast removal of soft phases ( e.g ., pearlite and ferrite) in the iron matrix limits the wear life of high-Cr white irons. To address this shortcoming, the authors successfully produced fine networks of M 6 C carbide in a high-Cr white iron through extensive thermodynamic calculations. Fishbone-like networks of M 6 C carbides were observed with an optical microscope. It was experimentally determined that such carbide networks protected the soft matrix and increased the overall hardness. Additionally, electron backscattered diffraction was conducted, which showed that the alloy contained phases of M 7 C 3 , M 6 C, ferrite, and retained austenite. Solidification sequence was determined by correlating the thermodynamic equilibrium calculation results with the size and distribution of each phase. A dry sand/rubber wheel apparatus following ASTM standard G65 Procedure A was utilized to assess the abrasive wear performance of the developed alloy. Results showed that the volume loss of the developed material was 25 pct less than that of conventional high-Cr white irons. Wear scars were investigated using a scanning electron microscope, and the improved wear resistance was attributed to the “buffer” effect and plastic deformation of the introduced M 6 C carbide networks.