Evaluating energy efficiency and economic effect of heat transfer in copper tube for small solar linear Fresnel reflector

An experimental and numerical investigation of a small linear Fresnel for water heating application has been carried out in Blida, Algeria. The numerical simulation with a 1D modeling in transient mode was performed by using the finite difference method. The thermal evaluation is based on the energy assessments characterized by the differential equations of pure water with a flow mass rate equal to 0.015 kg s −1 and copper absorber tube temperature. Moreover, the Fluent code has been developed in order to conduct the CFD modeling at the absorber tube of the solar collector. SolTrace software has been used to determine the optical behavior of the linear reflector. The average optical efficiency of the device is about 42.97%, but the average value of the experimental thermal efficiency reached 29.21% for 22/01/2015 and 29.20% for 19/02/2015. The average value of pure water temperature for 22/01/2015 is 67.28 °C, while its value for 19/02/2015 is 70.99 °C. This solar experimental setup will reduce the consumption of liquefied natural gas by 88.9 m 3 , which will reduce the CO 2 emission by 187.93 kg. In addition, its manufacturing cost will be recovered 16 years from the date of use of this heater.