Comparative study of warm and hot cross-wedge rolling:numerical simulation and experimental trial

The forming temperature of cross-wedge rolling (CWR) usually ranges from 950 to 1150 °C, but reducing the forming temperature has some advantages. This paper presents a comprehensive study of warm and hot cross-wedge rolling by using high-strength bolts as a case. Numerical simulation and experimental trials were conducted to make a detailed comparison of warm and hot cross-wedge rolling. Forming quality, microstructure, and mechanical properties of the rolled rods were investigated using scanning electron microscopy (SEM) and tensile testing. The results show that the rolling force and torque of warm cross-wedge rolling (WCWR) are more than three times greater than those of hot cross-wedge rolling (HCWR), and the workpiece rolled by WCWR shows more pit and stacking defects but fewer central cavities. The dispersing spheroidized cementite on ferrite matrix generated in WCWR results in decreased hardness and tensile strength of the rolled rods and a significant increase of elongation, which improves subsequent machinability.