Tritium release and retention in beryllium and titanium beryllide after neutron irradiation up to damage doses of 23-38 dpa

•For the first time, beryllium and titanium beryllide as massive pellets were irradiated in a nuclear reactor at temperatures of 710−1040 K up to production of 430–653 appm tritium and 4144–5992 appm helium, respectively.•The tritium retention in irradiated Be-7at.%Ti pellets is much lower than that in Be pellets, for example, 1 and 0.5 % to 48 and 34 % at 940 and 1040 K, respectively.•Open channels along grain and sub-grain boundaries are formed under neutron irradiation in beryllium, essentially contributing to the enhanced tritium release. Titanium beryllide is considered as an advanced neutron multiplier in the Helium Cooled Pebble Bed (HCPB) blanket of DEMO. Neutron irradiation of titanium beryllide together with beryllium as a reference material in material testing nuclear reactors can give essential data for the DEMO blanket design. Be-7at.%Ti (Be-7Ti) as well as Be were irradiated in the HFR, Petten, the Netherlands, at four temperatures of 710, 800, 940, 1040 K up to 23, 31, 36, 38 dpa, respectively. The post-irradiation examination (PIE) included thermal-programmed desorption (TPD) and Vickers hardness tests as well as microstructure study by optical metallography. Be and Be-7Ti pellets maintained their integrity after irradiation. Microstructure of Be-7Ti contains two phases, mainly, TiBe12, and also small amount of Be. Under irradiation, gas bubbles were formed in Be samples as well as in Be-phase in Be-7Ti samples. These bubbles contain helium and tritium produced in Be under irradiation. TPD tests showed a much lower tritium retention in Be-7Ti than in Be for all four irradiation temperatures. Vickers hardness of TiBe12 phase is much higher than that of Be-phase. According to the obtained data, Be-7Ti could be considered more preferred than Be as a neutron multiplier material in future fusion reactors due to the enhanced radiation damage resistance.