All ceramic cathode composite design and manufacturing towards low interfacial resistance for garnet-based solid-state lithium batteries

The critical factors that determine the performance and lifetime of solid-state batteries (SSBs) are driven by the electrode-electrolyte interfaces. The main challenge in fabricating all-oxide cathode composites for garnet-based SSBs has been lowering the thermal processing window in which both good contact and low interfacial resistance can be achieved. Here, we report an alternative ceramic processing strategy that enables the fabrication of all-oxide composite cathodes at an unusually low processing temperature without the use of extra sintering additives or a fluid electrolyte (polymer-gel or liquid electrolyte). We present specific examples of the most common LiFePO 4 and LiCoO 2 cathodes with a Li-garnet (Li 7 La 3 Zr 2 O 12 , LLZO) solid-electrolyte. We demonstrate an infiltration step to directly synthesize the LiCoO 2 cathode from metal salts in a porous LLZO scaffold, resulting in the formation of a composite cathode such as LiCoO 2 -LLZO on top of a dense LLZO solid electrolyte at a low processing temperature of 700 °C. A promising discharge capacity of 118 mA h g −1 (3-4.05 V) with a low interfacial resistance of 62 Ohm cm 2 is realized for LiCoO 2 with a lithium anode, whereas critical phase instabilities for LiFePO 4 are uncovered. Our findings encourage a move away from synthesis techniques that employ particle mixing and sintering to fabricate composites. We provide a blueprint for circumventing adverse interphase reactions according to chemistry and ceramic thermal processing budgets in the preparation of these ceramic interfaces as well as for increasing the number of reaction sites for high-performing composite cathodes for Li-garnet SSBs. In addition, the ceramic methods presented are scalable and mass manufacturable for the large-scale production of such composite cathodes for future industry. Solution-assisted all-oxide-cathode formation method allows reduction of processing temperature without using sintering additives, demonstrating the lowest interfacial impedance in garnet-based solid-state lithium batteries.