Numerical and experimental investigations in the damping behavior of particle dampers attached to a vibrating structure
•Experimental and numerical investigations on the damping of particle dampers.•Development of a coupled discrete element-reduced finite element model for analysis of the modal parameters for multiple eigenfrequencies.•Experimental validation of the model and numerical and experimental investigations...
Gespeichert in:
Veröffentlicht in: | Computers & structures 2020-10, Vol.238, p.106281, Article 106281 |
---|---|
Hauptverfasser: | , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | •Experimental and numerical investigations on the damping of particle dampers.•Development of a coupled discrete element-reduced finite element model for analysis of the modal parameters for multiple eigenfrequencies.•Experimental validation of the model and numerical and experimental investigations in the position of the particle damper and its filling ratio.
Particle damping is a passive damping technique at which granular material is either filled in a box attached to a vibrating structure or it is filled in holes embedded in the vibrating structure. Due to the structural vibrations, momentum is transferred to the granular material which interacts with each other. As a result, energy is dissipated by impacts and frictional phenomena between the particles.
In this paper, a discrete element model is combined with a reduced finite element model. It can be analyzed for a wide frequency range. The accuracy is validated by experiments. The testbed consists of a beam with a free-free boundary condition excited by a shaker and its velocity profile is measured with a laser scanning vibrometer. The particle damper is filled with different steel balls. The discrete element code uses continuous contact models. An efficient contact algorithm is used while a coupling with a finite element model of the structure enables the prediction of the overall system movement.
The system is analyzed over a wide frequency range for multiple eigenmodes. The first comparisons of experiments and simulations are performed showing a good agreement of the frequency response and modal parameters. A high dependency of the damping on the position of the particle box and its filling ratio is obtained. |
---|---|
ISSN: | 0045-7949 1879-2243 |
DOI: | 10.1016/j.compstruc.2020.106281 |