MnCl2 laser with pulse repetition frequency up to 125 kHz

•The MnCl2 laser with the pulse repetition frequency up to 125 kHz was designed.•The maximum output laser power was 1 W at the 17.6 kHz.•The dependence between the output power and pumping power is shown to be linear.•Two wavelengths in the visible spectral range and five wavelengths in IR range wer...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Optics and laser technology 2020-09, Vol.129, p.106302, Article 106302
Hauptverfasser: Shiyanov, Dmitry, Trigub, Maxim, Sokovikov, Vladimir, Evtushenko, Gennadiy
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:•The MnCl2 laser with the pulse repetition frequency up to 125 kHz was designed.•The maximum output laser power was 1 W at the 17.6 kHz.•The dependence between the output power and pumping power is shown to be linear.•Two wavelengths in the visible spectral range and five wavelengths in IR range were obtained. This paper considers the operating parameters of 24 cm3 active volume MnCl2-laser in a wide range of PRF (pulse repetition frequency). The maximum average power reaches 1 W at 17.6 kHz PRF and 0.2% efficiency. The laser generation on manganese metal at 125 kHz PRF has been obtained for the first time. The pumping conditions under which the output power of the visible spectral range starts exceeding the output power at IR lines have been determined. In particular, the electric field strength is calculated for the given GDT (gas discharge tube) parameters and buffer gas pressure. The dependence between the output power and pumping power is shown to be linear. The condition provides the change in IR and VIS output power relation is determined.
ISSN:0030-3992
1879-2545
DOI:10.1016/j.optlastec.2020.106302