Partial Hydrogenation of Palm Oil-Derived Biodiesel over Ni/Electrospun Silica Fiber Catalysts

Given the high accessibility of reactants to the active metal sites of fibrous catalysts, in this research, an electrospun silica fiber was applied as a support of nickel catalysts (Ni/SF) for the partial hydrogenation of palm oil fatty acid methyl ester (FAME) in a fixed-bed reactor. The textural p...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Catalysts 2020-09, Vol.10 (9), p.993
Hauptverfasser: Phumpradit, Supanut, Reubroycharoen, Prasert, Kuchonthara, Prapan, Ngamcharussrivichai, Chawalit, Hinchiranan, Napida
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Given the high accessibility of reactants to the active metal sites of fibrous catalysts, in this research, an electrospun silica fiber was applied as a support of nickel catalysts (Ni/SF) for the partial hydrogenation of palm oil fatty acid methyl ester (FAME) in a fixed-bed reactor. The textural properties, reducibility, Ni dispersion and morphology of Ni/SF catalysts were characterized and compared to those of a Ni/porous silica ball (Ni/SB). Under 1 bar H2 pressure at 140 °C, the 30 wt% Ni/SF catalyst exhibited a high turnover frequency (TOF) of 1396 h−1 to convert methyl linoleate (C18:2) to more saturated structures. On the other hand, the system using Ni/SB catalysts showed a TOF of only 141 h−1. This result was due to the effect of the higher acidity of the silica fiber, which promoted the higher adsorption of polyunsaturated portions in FAME. The non-porous characteristics and open morphology of the Ni/SF catalysts also allowed FAME and H2 molecules to easily access the Ni active sites deposited on the surface of the silica fiber and suppressed the selectivity to cis–trans isomerization. Stability testing of the Ni/SF catalyst showed that the C18:2 conversion decreased from 71% to 60% after long-term operation for 16 h possibly due to the weak metal–support interaction that facilitated Ni particle loss from the catalyst surface.
ISSN:2073-4344
2073-4344
DOI:10.3390/catal10090993