Variation of Structure and Hardness of Tool Steel for Hot Pressing upon Heating after Isothermal Holding in the Bainite Range

This work is devoted to transformations in tool steel for hot pressing after isothermal holding in the bainite range and heating in the range of 500–780°C. Medium carbon steel (0.44% C) is investigated: Si–Cr–Ni–Mn–Mo–V–Ti–Nb. It is shown that, at heating to 630°C after isothermal holding, when the...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Inorganic materials : applied research 2020, Vol.11 (4), p.936-940
Hauptverfasser:	Kruglyakov, A. A., Nikulin, S. A., Rogachev, S. O., Kozlov, D. A., Baranova, A. P., Nguyen, Hoan Xuan, Lebedeva, N. V., Panova, G. A.
Format:	Artikel
Sprache:	eng
Schlagworte:	Austenite Bainite Chemistry Chemistry and Materials Science Chromium Hardness Heating Hot pressing Industrial Chemistry/Chemical Engineering Inorganic Chemistry Manganese Materials Science Medium carbon steels Molybdenum Nickel Niobium Silicon Titanium Tool steels
Online-Zugang:	Volltext
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	This work is devoted to transformations in tool steel for hot pressing after isothermal holding in the bainite range and heating in the range of 500–780°C. Medium carbon steel (0.44% C) is investigated: Si–Cr–Ni–Mn–Mo–V–Ti–Nb. It is shown that, at heating to 630°C after isothermal holding, when the amount of newly formed austenite is comparatively low, the properties of steel are determined mainly by structural variations in bainite sectors and its hardness continuously decreases. At higher heating temperatures, the amount of austenite sharply increases, and its subsequent decomposition upon cooling leads to a significant increase in steel hardness.
ISSN:	2075-1133 2075-115X
DOI:	10.1134/S207511332004019X