Investigation of Burr on Strips Cast by Vertical-Type High-Speed Twin Roll Caster

The factors affecting the shape and size of burrs that form at the edges of strips cast by a vertical type twin roll caster were investigated in this study. The size of the burr was found to be affected by the Si content of the strip. When the Si content was larger than 7 mass%, the burrs became larger. The position of the lower edge of the side dam plate also affected the shape of the burr. The burrs that formed were generally perpendicular to the strip surface but changed to being parallel to the strip surface as the position of the lower edge of the side dam plate was displaced upward from the center of the rolls.