Switched-Capacitor-Based Neutral-Point-Clamped Quasi-Switched Boost Multilevel Inverter

Reliable and efficient inverters are becoming essential in the current scenario of electrical power generation from renewable energy sources. Owing to inherent buck–boost ability and shoot-through immunity, the single-stage inverters are getting solid evaluation as compared to conventional inverters...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Arabian journal for science and engineering (2011) 2020-03, Vol.45 (3), p.1765-1775
Hauptverfasser: Ajaykumar, T., Patne, Nita R.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Reliable and efficient inverters are becoming essential in the current scenario of electrical power generation from renewable energy sources. Owing to inherent buck–boost ability and shoot-through immunity, the single-stage inverters are getting solid evaluation as compared to conventional inverters in the present era of renewable energy generation. However, the maximum attainable boosting of the single-stage inverters is limited by means of device stresses and spectral performance. This paper proposes a switched-capacitor-based quasi-switched boost neutral-point-clamped single-stage multilevel inverter. It is able to make desired AC output voltage in a single-stage conversion from a low-level DC voltage engendered by renewable sources such as fuel cell and PV cell. Further, it can attain high voltage gain at reduced voltage stresses on the switches, capacitors and diodes by cascading multiple switched-capacitor cells to quasi-switched boost network. The working principle and steady-state analysis of proposed topology are presented in order to obtain mathematical relation between input and output voltages. The effectiveness of the proposed inverter has been compared with other impedance-source multilevel inverters in terms of voltage gain, boosting capability, voltage stresses and efficiency. The operation of the proposed system is verified by MATLAB simulation. Also, a laboratory prototype is built and tested to verify the theoretical analysis.
ISSN:2193-567X
1319-8025
2191-4281
DOI:10.1007/s13369-019-04254-2