Influence of Various Factors on the Wear Process of Electrolytic Nickel-Phosphorus Coatings

The influence of SiC additives and annealing on the wear of electrolytic nickel-phosphorus coatings under different friction conditions (sliding, fretting wear, and fretting corrosion) was studied. It was found that wear of coatings due to sliding friction is much lower than due to fretting wear and...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Chemical and petroleum engineering 2019-11, Vol.55 (7-8), p.663-668
Hauptverfasser:	Aslanyan, I. R., Emaev, I. I., Shuster, L. Sh
Format:	Artikel
Sprache:	eng
Schlagworte:	Additives Annealing Chemistry Chemistry and Materials Science Coatings Corrosion Corrosion and anti-corrosives Corrosive wear Fretting Fretting corrosion Geotechnical Engineering & Applied Earth Sciences Industrial Chemistry/Chemical Engineering Industrial Pollution Prevention Materials Science. Corrosion Protection Mineral Resources Nickel Phosphorus Silicon carbide Sliding friction
Online-Zugang:	Volltext
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	The influence of SiC additives and annealing on the wear of electrolytic nickel-phosphorus coatings under different friction conditions (sliding, fretting wear, and fretting corrosion) was studied. It was found that wear of coatings due to sliding friction is much lower than due to fretting wear and fretting corrosion. It is shown that in most of the considered friction conditions the least wear is provided by the heattreated nickel-phosphorus coating without SiC additives.
ISSN:	0009-2355 1573-8329
DOI:	10.1007/s10556-019-00676-9