Advanced partial nucleation for single-phase FA0.92MA0.08PbI3-based high-efficiency perovskite solar cells

To date, extensive research has been carried out, with considerable success, on the development of high-performance perovskite solar cells (PSCs). Owing to its wide absorption range and remarkable thermal stability, the mixed-cation perovskite FA x MA 1− x PbI 3 (formamidinium/methylammonium lead iodide) promises high performance. However, the ratio of the mixed cations in the perovskite film has proved difficult to control with precursor solution. In addition, the FA x MA 1− x PbI 3 films contain a high percentage of MA + and suffer from serious phase separation and high trap states, resulting in inferior photovoltaic performance. In this study, to suppress phase separation, a post-processing method was developed to partially nucleate before annealing, by treating the as-prepared intermediate phase FAI-PbI 2 -DMSO (DMSO: dimethylsulfoxide) with mixed FAI/MAI solution. It was found that in the final perovskite, FA 0.92 MA 0.08 PbI 3 , defects were substantially reduced because the analogous molecular structure initiated ion exchange in the post-processed thin perovskite films, which advanced partial nucleation. As a result, the increased light harvesting and reduced trap states contributed to the enhancement of open-circuit voltage and short-circuit current. The PSCs produced by the post-processing method presented reliable reproducibility, with a maximum power conversion efficiency of 20.80% and a degradation of ∼30% for 80 days in standard atmospheric conditions.