The End-to-End Simulation of Semi-Continuous Casting and Subsequent Hot Rolling with Account of Microstructure

The End-to-End Simulation of Semi-Continuous Casting and Subsequent Hot Rolling with Account of Microstructure

Basing on the developed methodology for data transfer between the ProCAST and Deform-3D software products, which allows exporting geometry, temperature, residual stresses and microstructure of the casting, it is simulated semi-continuous casting of ingots from aluminum alloy 5182 into a direct chill...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Key engineering materials 2019-09, Vol.822, p.11-15
Hauptverfasser: Jiang, Cho Pei, Erisov, Yaroslav A., Surudin, Sergey, Bobrovskij, Igor N., Khamrayev, Bakhtiyar
Format: Artikel
Sprache:eng
Schlagworte:
Aluminum base alloys
Chill rolls
Continuous casting
Data transfer (computers)
Direct chill casting
Hot rolling
Ingot casting
Microstructure
Permanent molds
Residual stress
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Basing on the developed methodology for data transfer between the ProCAST and Deform-3D software products, which allows exporting geometry, temperature, residual stresses and microstructure of the casting, it is simulated semi-continuous casting of ingots from aluminum alloy 5182 into a direct chill mold and their following hot rolling in a reversing rolling stand to with aim to study microstructure the evolution.
ISSN:1013-9826
1662-9795
1662-9795
DOI:10.4028/www.scientific.net/KEM.822.11