A large-eddy simulation study on the influence of diesel pilot spray quantity on methane-air flame initiation

The present study is a continuation of the previous work by Kahila et al. (2019), in which a dual-fuel (DF) ignition process was numerically investigated by modeling liquid diesel-surrogate injection into a lean methane-air mixture in engine relevant conditions. Earlier, the injection duration (tinj) of diesel-surrogate exceeded substantially the characteristic autoignition time scale. Here, such a pilot spray ignition problem is studied at a fixed mass flow rate but with a varying tinj. The focus is on understanding the influence of pilot quantity on spray dilution process and low- and high-temperature chemistry. In total, ten cases are computed with multiple diesel pilot quantities by utilizing a newly developed large-eddy simulation/finite-rate chemistry solver. The baseline spray setup corresponds to the Engine Combustion Network (ECN) Spray A configuration, enabling an extensive validation of the present numerical models and providing a reference case for the DF computations. Additionally, experimental results from a single-cylinder laboratory engine are provided to discuss the ignition characteristics in the context of a real application. The main results of the present study are: (1) reducing tinj introduces excessive dilution of the DF mixture, (2) dilution lowers the reactivity of the DF mixture, leading to delayed high-temperature ignition and slow overall methane consumption, (3) low enough pilot quantity (tinj