Deformation Experiments on Bowland and Posidonia Shale—Part II: Creep Behavior at In Situ pc–T Conditions

To unravel their long-term creep properties at simulated reservoir conditions, we conducted constant stress deformation experiments at elevated confining pressures, p c = 50–115 MPa, and temperatures, T = 75–150 °C, on Posidonia (GER) and Bowland (UK) shale, which exhibit varying petrophysical and mechanical properties. Depending on applied p c –T conditions and sample composition, recorded creep curves exhibit either only a primary (decelerating) or additionally a secondary (quasi-steady state) and a tertiary (accelerating) creep phase during deformation. At high temperature and axial differential stress and low confining pressure, creep strain is enhanced and a transition from primary towards secondary and tertiary creep behavior is observable. Creep strain of Posidonia shale, which is rich in weak constituents (clay, mica, and organic content), is enhanced when compared to creep strain recorded during deformation of either carbonate- or quartz-rich Bowland shale. Electron microscopy observations revealed that creep strain is mainly accommodated by the deformation of weak minerals and local pore space reduction. In addition, microcrack growth occurred during secondary creep. An empirical correlation between creep strain and time based on a power law was used to describe the decelerating creep phase, also accounting for the influence of confining pressure, temperature, and axial differential stress. The results suggest that the primary creep strain can be correlated with mechanical properties determined from short-term constant strain rate experiments such as static Young’s modulus and triaxial compressive strength.