Measurement of Thermophysical Properties of Loose Coal Based on Multi-dimensional Constant Temperature Boundary Unsteady Heat Transfer Model
Based on the unsteady state heat transfer model, production solution method is proposed to calculate the thermal diffusivity and thermal conductivity of loose coal. By constructing the heat transfer model of the infinite large plate and the infinitely long cylinder, the temperature rise formula of t...
Gespeichert in:
Veröffentlicht in: | International journal of thermophysics 2019, Vol.40 (9), p.1-15, Article 82 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Based on the unsteady state heat transfer model, production solution method is proposed to calculate the thermal diffusivity and thermal conductivity of loose coal. By constructing the heat transfer model of the infinite large plate and the infinitely long cylinder, the temperature rise formula of the production solution method is established. The measured temperature rise is then used by the MATLAB programming software to inversely calculate the thermophysical parameters of the loose coal. During the experiment, a constant temperature boundary was constructed using an incubator and a high thermal conductivity copper cylindrical case. The experiment selected anthracite, bituminous coal in Panyi Mine, and bituminous coal in Lizuo Mine for thermophysical property measurement. The results show that the relative deviation between each measurement result and related literature is within 5 %, and each sample is tested three times. The deviations are less than 5 %, which verify the stability of the test method. Finally, the experimental model was established in the ANSYS FLUENT simulation software, and the thermophysical parameters of the measured coal samples were substituted into the model for simulation calculation. It was found that the simulation temperature rise was consistent with the measured temperature rise. |
---|---|
ISSN: | 0195-928X 1572-9567 |
DOI: | 10.1007/s10765-019-2548-7 |