Toroidal versus ball nose and flat bottom end mills

Toroidal versus ball nose and flat bottom end mills

This paper compares the surface roughness along and across the feed directions produced by toroidal, ball nose, and flat bottom end mills. The study is conducted numerically and by cutting tests of aluminium. The results show that the toroidal cutter inherits the merits of the other two cutters; it...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:International journal of advanced manufacturing technology 1997-05, Vol.13 (5), p.326-332
Hauptverfasser: Bedi, S., Ismail, F., Mahjoob, M. J., Chen, Y.
Format: Artikel
Sprache:eng
Schlagworte:
Aluminum
Aluminum industry
End milling cutters
Feed direction
Mills
Nose
Production planning
Scallops
Surface roughness
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This paper compares the surface roughness along and across the feed directions produced by toroidal, ball nose, and flat bottom end mills. The study is conducted numerically and by cutting tests of aluminium. The results show that the toroidal cutter inherits the merits of the other two cutters; it produces small scallops across the feed direction, and low roughness along the feed direction.
ISSN:0268-3768
1433-3015
DOI:10.1007/BF01178252