Analysis of the optimisation of parameters for the laser machining of timber

Analysis of the optimisation of parameters for the laser machining of timber

Fuzzy-based Taguchi methods were used to optimise the parameters for the CO 2 laser machining of timber. An orthogonal array, the signal-to-noise (S/N) ratio, and the analysis of variance (ANOVA) are employed with reference to process factors. Combining the Taguchi method and fuzzy logic, using the...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:International journal of advanced manufacturing technology 2017-04, Vol.89 (9-12), p.3721-3729
Hauptverfasser: Deng, Chyn-Shu, Hsia, Kuo-Lun
Format: Artikel
Sprache:eng
Schlagworte:
CAE) and Design
Carbon dioxide
Carbon dioxide lasers
Computer-Aided Engineering (CAD
Engineering
Fuzzy logic
Industrial and Production Engineering
Laser machining
Mechanical Engineering
Media Management
Optimization
Original Article
Orthogonal arrays
Parameters
Taguchi methods
Variance analysis
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Fuzzy-based Taguchi methods were used to optimise the parameters for the CO 2 laser machining of timber. An orthogonal array, the signal-to-noise (S/N) ratio, and the analysis of variance (ANOVA) are employed with reference to process factors. Combining the Taguchi method and fuzzy logic, using the multiple performance characteristics index (MPCI), allowed determining the optimal combination of factors for cutting the timber. The confirmatory test was performed to verify the estimated response.
ISSN:0268-3768
1433-3015
DOI:10.1007/s00170-016-9341-6